Black Friday Sale Save up to 41% on KESS3 activations and bundles Ends 12 Jan 2027 Shop the deals
Skip to main content

John Deere code ECU 157.01 — Extremely low fuel rail pressure

SPN 157 · FMI 1 · Controller ECU

ECU 157.01 Severity Serious

What ECU 157.01 means for you

Most severe fault level: diagnose before continuing to work the machine.

Symptoms

  • Code ECU 157.01 (also written ECU 000157.01) stored by the Engine Control Unit
  • A warning may be shown on the machine display

Common causes

  • A real operating condition: the fuel rail pressure reading is genuinely too low
  • Faulty fuel rail pressure giving an incorrect reading
  • Wiring or connector fault affecting the fuel rail pressure signal

Tune it yourself

Add John Deere machine tuning to your workshop. We supply the tools and the file, and you keep the profit.

Start tuning

What this code means

Fuel pressure in the common rail is far below the expected level, the most severe low condition (FMI 1).

In SAE J1939 terms this is SPN 157, reported with failure mode identifier (FMI) 1: the value is valid but below its normal operating range (most severe level). It is logged by the Engine Control Unit (ECU).

How a workshop diagnoses it

  1. Read all active and stored codes with a John Deere-compatible diagnostic tool and note related codes.
  2. Confirm the real fuel rail pressure with a mechanical pressure gauge before replacing parts.
  3. Look for the operating cause (load, cooling, filters, supply) if the reading is genuine.
  4. If the real value is normal, test the fuel rail pressure and its wiring.

Frequently asked questions

01 What does John Deere code ECU 157.01 (000157.01) mean?

Fuel pressure in the common rail is far below the expected level, the most severe low condition (FMI 1).

02 Is John Deere code ECU 157.01 serious?

Severity: high. Most severe fault level: diagnose before continuing to work the machine.

03 Which John Deere machines can show ECU 157.01?

Our code list records it on John Deere skid steers. The exact meaning can depend on the machine and software level, so confirm with a diagnostic read.

04 Will an ECU remap clear code ECU 157.01?

No. A calibration does not repair the fault behind this code. Repair the fuel rail pressure issue and confirm no codes remain active before the ECU is read for tuning.

Tune your John Deere

Find your John Deere in our tuning catalogue: stage 1 figures, the tool and cable for each machine, and an ECU file service for workshops.

John Deere tuning
John Deere tractor working in a field
Photo: Ronnie Robertson / CC BY-SA 2.0

← All John Deere fault codes