Skip to main content

Audi A6 C7 2011 - 2018 bosch edc17cp54 ECU Remap & Tuning

Power 218 HP / 163 kW
Fuel Diesel
Version C7 2011 - 2018 3.0 tdi quattro 218hp (160kw) 500nm
Model year(s) 2011–2018
Audi A6

Vehicle

Make
Audi
Model
A6
Generation
C7
Model years
2011–2018

Powertrain

Engine
3.0 TDI Quattro
Fuel
Diesel
Stock power
218 HP / 163 kW
Stock torque
500 Nm

ECU Identification

ECU
Bosch EDC17CP54
KESS3 Protocols
Dealer access required Register
1 ECU hardware number known for this ECU on Audi

Reference only — confirm against the number printed on your ECU. Not necessarily this exact variant’s part number.

  • 0281030330
3 software / calibration numbers
  • 4G2907401
  • 10SW044552
  • 0007

Live ECU tuning for the Audi A6, with measured power and torque gains, a dyno preview, and the file options grouped into one focused page.

Original Tuned

* Estimated curve, illustrative only, not a measured dyno. Actual values will vary.

Stock Tuned Gain
Power (HP) 218 320 +102 (+47%)
Torque (Nm) 500 680 +180 (+36%)

Available tuning options

Performance 2

Hard cut limiter

Tune

Towing | Power

Emissions & anti-pollution 7

DPF off We take no responsibility for legal actions as a result of disabling a DPF system, this may be illegal in your country. You must perform a forced regeneration or reset all DPF levels before reading the ECU. DPF must be removed after.

EGR off We take no responsibility for legal actions as a result of disabling a EGR system, this may be illegal in your country. If DPF is fitted we suggest not turning EGR off.

AdBlue / SCR off We take no responsibility for legal actions as a result of disabling a SCR / ADBLUE / DEF system, this may be illegal in your country.

DTC off You must clear codes before writing tuned file. Not required if DPF/EGR related and DPF/EGR selected.

NOx sensor off

Lambda / O2 sensor off

TVA (throttle valve) off

Driveability & comfort 6

Speed limit raised We take no responsibility for legal actions as a result of a raised speed limiter, this may be illegal in your country.

Exhaust flap off

Hot start / Cold start fix

Start / Stop system off

Swirl / Intake Flaps off

Torque Monitoring off

Services, files & hardware 6

Clone ECU Must supply reads of original and new ecu's. Must bench read.

High flow turbo charger You must also select towing or power tune.

Send us your ECU Includes standard bench fee processing for 1 ECU and NZ return freight. Include a send in ECU form fully filled out with your ECU.

Return file to original

Immo off (If possible)

Checksum correction

Installation and process

Choose the tuning package that fits your goals, confirm the vehicle and ECU, and request your files. Alt Tune then guides the read, write, and verification steps for your selected vehicle — whether handled remotely with a supported flash tool or on the bench.

Support, safety, and trust

Vehicle condition, maintenance history, fuel quality, and intended use all affect results. We only publish gains we can support for the listed configuration, and we ask that you confirm suitability for your vehicle and application before ordering.

Frequently asked questions

01 Can the Audi A6 C7 2011 - 2018 bosch edc17cp54 be tuned?

This page describes an active entry in the Alt Tune catalogue. Which options apply depends on the control unit and the configuration actually fitted, and is confirmed after we review your file.

02 What gains can I expect?

This vehicle shows gains of up to +102 HP and +180 Nm over the factory figures. Real-world results vary with condition and fuel.