* Estimated curve, illustrative only, not a measured dyno. Actual values will vary.
Iveco Eurocargo bosch edc17c49 ECU Remap & Tuning
Vehicle
- Make
- Iveco
- Model
- Eurocargo
Powertrain
- Engine
- e13/3.9l
- Fuel
- Diesel
- Stock power
- 130 HP / 97 kW
- Stock torque
- 440 Nm
ECU Identification
- ECU
- Bosch EDC17C49
- Compatible tools
-
- Autotuner BENCH, BOOT, OBD
- CMDFlash BENCH, BOOT
- Magic Motorsport Flex BENCH, BOOT, OBD
- Dimsport New Genius BOOT, OBD
- Dimsport New Trasdata BENCH
Compatibility listed for: EDC17C49, BOSCHEDC17C49
ECU references
Known references for this ECU family on Iveco. Confirm the numbers on your ECU or readout. These are not confirmed for this exact variant and do not indicate an available tuning file.
HW2
02810356480281030169
SW / Calibration3
10SW04233258028667695801557345
Live ECU tuning for the Iveco Eurocargo, with measured power and torque gains, a dyno preview, and the file options grouped into one focused page.
| Stock | Tuned | Gain | |
|---|---|---|---|
| Power (HP) | 130 | 160 | +30 (+23%) |
| Torque (Nm) | 440 | 540 | +100 (+23%) |
Available tuning options
Performance 2
Tune
Towing | PowerVGT delete
Emissions & anti-pollution 6
DPF off We take no responsibility for legal actions as a result of disabling a DPF system, this may be illegal in your country. You must perform a forced regeneration or reset all DPF levels before reading the ECU. DPF must be removed after.
EGR off We take no responsibility for legal actions as a result of disabling a EGR system, this may be illegal in your country.
AdBlue / SCR off We take no responsibility for legal actions as a result of disabling a SCR / ADBLUE / DEF system, this may be illegal in your country.
DTC You must clear codes before writing tuned file.
TVA (throttle valve) off
MAF sensor off
Driveability & comfort 2
Speed limit raised We take no responsibility for legal actions as a result of a raised speed limiter, this may be illegal in your country.
Torque Monitoring off
Services, files & hardware 2
Send us your ECU Contact us to confirm ECU bench service availability and return freight before sending your ECU.
Return file to original
Installation and process
Choose the tuning package that fits your goals, confirm the vehicle and ECU, and request your files. Alt Tune then guides the read, write, and verification steps for your selected vehicle — whether handled remotely with a supported flash tool or on the bench.
Support, safety, and trust
Vehicle condition, maintenance history, fuel quality, and intended use all affect results. We only publish gains we can support for the listed configuration, and we ask that you confirm suitability for your vehicle and application before ordering.
Frequently asked questions
This page describes an active entry in the Alt Tune catalogue. Which options apply depends on the control unit and the configuration actually fitted, and is confirmed after we review your file.
This vehicle shows gains of up to +30 HP and +100 Nm over the factory figures. Real-world results vary with condition and fuel.