Most popular brands
Dyno chart
* This chart should be considered a visual representation only, actual values will vary.
John Deere 6030 Series tractor ECU tuning and remapping for 72 supported diesel engine variants. Compare Stage 1, Stage 2 and Stage 3 power and torque gains, ECU compatibility and available tuning options.
Search 43,000+ vehicle / ECU combinations
* This chart should be considered a visual representation only, actual values will vary.
72 tuning configurations for the John Deere 6030 Series. Select your exact engine to see gains, options and connection details. Power gains up to +36 HP.
Alt Tune covers 72 John Deere 6030 Series configurations, including the 6130 Premium 4.5L I4, 6230 4.5L I4, 6230 Premium 4.5L I4, 6330 4.5L I4. Stock power spans 80 to 155 HP. Stage 1 adds up to +36 HP (+28%).
An ECU tune re-optimises the factory calibration within the standard hardware limits. On a working machine the useful change is broad, early torque for heavy draft, PTO work and hydraulics — where the load actually is.
Fuelling, boost and timing are calibrated together, with exhaust temperature and smoke kept in check. The machine is scanned before and after the write, and its original file is retained.
Power tune — more torque and pulling power at working revs for draft, PTO and hydraulic loads, calibrated within the standard hardware limits.
DPF off, EGR off and AdBlue / SCR off — cleaner running and fewer regeneration interruptions and DEF faults that cost downtime in the field.
| Engine | Stock | Tuned | Stage 1 gain |
|---|---|---|---|
| 6630p 6.8l Tier3 | 139 hp / 557 Nm | 175 hp / 660 Nm | +36 hp / +103 Nm |
| 6230 ECE R 24 | 95 hp / 430 Nm | 122 hp / 567 Nm | +27 hp / +137 Nm |
| 6830p 6.8l Tier3 | 150 hp / 657 Nm | 175 hp / 750 Nm | +25 hp / +93 Nm |
| 6430p 4.5l Tier3 | 128 hp / 518 Nm | 150 hp / 620 Nm | +22 hp / +102 Nm |
| 6130 Premium 4.5L I4 | 80 hp / 330 Nm | 99 hp / 376 Nm | +19 hp / +46 Nm |
Typical gains for these engines from our tuning catalogue; exact results depend on the specific engine and its condition. Choose your generation and engine above for its stock and tuned figures.
Useful tuning is not about one peak number. It is about a machine that pulls harder at working revs and holds it through long days in the field, with less strain on the driveline.
The calibration targets the usable torque band while respecting the transmission, cooling and exhaust-temperature limits of the selected engine.
Depending on the exact engine, Stage 1 on the 6030 Series adds up to +36 HP (+28%). Choose your generation and engine above for its precise stock and tuned figures from our database.
We health check the vehicle first and keep a full stock backup. The calibration is built around the limits of the engine, turbo, transmission, cooling system and the condition of the vehicle.
Yes — more torque low down means the machine pulls heavier draft and runs implements and hydraulics more comfortably, often with lower fuel burn per hour and fewer regeneration interruptions in the field. Every calibration respects the engine, driveline and cooling limits.
The right route depends on the vehicle, its modifications and how it is used. A towing or work vehicle may benefit from workshop checks, while a healthy standard configuration can often be handled remotely.
Sign in with your files.alttune.com account to unlock the advanced cable listing.