John Deere code ECU 4364.01 — SCR catalyst conversion efficiency critically low
SPN 4364 · FMI 1 · Controller ECU
What ECU 4364.01 means for you
Most severe fault level: diagnose before continuing to work the machine.
Symptoms
- Code ECU 4364.01 (also written ECU 004364.01) stored by the Engine Control Unit
- A warning may be shown on the machine display
Common causes
- A real operating condition: the SCR catalyst efficiency reading is genuinely too low
- Faulty SCR catalyst efficiency giving an incorrect reading
- Wiring or connector fault affecting the SCR catalyst efficiency signal
Tune it yourself
Add John Deere machine tuning to your workshop. We supply the tools and the file, and you keep the profit.
Start tuningWhat this code means
NOx measured at the SCR outlet is too high, meaning the SCR catalyst is converting far less NOx than it should. Poor-quality DEF is one possible cause of this code.
In SAE J1939 terms this is SPN 4364, reported with failure mode identifier (FMI) 1: the value is valid but below its normal operating range (most severe level). It is logged by the Engine Control Unit (ECU).
How a workshop diagnoses it
- Read all active and stored codes with a John Deere-compatible diagnostic tool and note related codes.
- Compare the SCR catalyst efficiency reading in live data with the actual machine condition before replacing parts.
- Look for the operating cause (load, cooling, filters, supply) if the reading is genuine.
- If the real value is normal, test the SCR catalyst efficiency and its wiring.
Frequently asked questions
NOx measured at the SCR outlet is too high, meaning the SCR catalyst is converting far less NOx than it should. Poor-quality DEF is one possible cause of this code.
Severity: high. Most severe fault level: diagnose before continuing to work the machine.
Our code list records it on John Deere skid steers. The exact meaning can depend on the machine and software level, so confirm with a diagnostic read.
No. A calibration does not repair the fault behind this code. Repair the SCR catalyst efficiency issue and confirm no codes remain active before the ECU is read for tuning.
Tune your John Deere
Find your John Deere in our tuning catalogue: stage 1 figures, the tool and cable for each machine, and an ECU file service for workshops.
John Deere tuning