Black Friday Sale Save up to 41% on KESS3 activations and bundles Ends 12 Jan 2027 Shop the deals
Skip to main content

John Deere code ECU 4364.17 — SCR catalyst conversion efficiency slightly low

SPN 4364 · FMI 17 · Controller ECU

SPN 4364 FMI 17 on other engine makes →

ECU 4364.17 Severity Minor

What ECU 4364.17 means for you

Least severe level: monitor and diagnose at the next opportunity.

Symptoms

  • Code ECU 4364.17 (also written ECU 004364.17) stored by the Engine Control Unit
  • Regeneration is not started while outlet NOx remains too high.
  • A warning may be shown on the machine display

Common causes

  • A real operating condition: the SCR catalyst efficiency reading is genuinely too low
  • Faulty SCR catalyst efficiency giving an incorrect reading
  • Wiring or connector fault affecting the SCR catalyst efficiency signal

Tune it yourself

Add John Deere machine tuning to your workshop. We supply the tools and the file, and you keep the profit.

Start tuning

What this code means

NOx at the SCR outlet is high enough that regeneration cannot be started. FMI 17 rates the efficiency drop as the least severe level.

In SAE J1939 terms this is SPN 4364, reported with failure mode identifier (FMI) 17: the value is below its normal range (least severe level). It is logged by the Engine Control Unit (ECU).

How a workshop diagnoses it

  1. Read all active and stored codes with a John Deere-compatible diagnostic tool and note related codes.
  2. Compare the SCR catalyst efficiency reading in live data with the actual machine condition before replacing parts.
  3. Look for the operating cause (load, cooling, filters, supply) if the reading is genuine.
  4. If the real value is normal, test the SCR catalyst efficiency and its wiring.

Frequently asked questions

01 What does John Deere code ECU 4364.17 (004364.17) mean?

NOx at the SCR outlet is high enough that regeneration cannot be started. FMI 17 rates the efficiency drop as the least severe level.

02 Is John Deere code ECU 4364.17 serious?

Severity: low. Least severe level: monitor and diagnose at the next opportunity.

03 Which John Deere machines can show ECU 4364.17?

Our code list records it on John Deere skid steers. The exact meaning can depend on the machine and software level, so confirm with a diagnostic read.

04 Will an ECU remap clear code ECU 4364.17?

No. A calibration does not repair the fault behind this code. Repair the SCR catalyst efficiency issue and confirm no codes remain active before the ECU is read for tuning.

Tune your John Deere

Find your John Deere in our tuning catalogue: stage 1 figures, the tool and cable for each machine, and an ECU file service for workshops.

John Deere tuning
John Deere tractor working in a field
Photo: Ronnie Robertson / CC BY-SA 2.0

← All John Deere fault codes