Most popular brands
Dyno chart
* This chart should be considered a visual representation only, actual values will vary.
Real stock to tuned power and torque for every supported Challenger Mt engine, with the exact OBD cable, the recommended tool, and every remap available.
Search 43,000+ vehicle / ECU combinations
* This chart should be considered a visual representation only, actual values will vary.
115 tuning configurations for the Challenger Mt. Select your exact engine to see gains, options and connection details. Power gains up to +105 HP.
Alt Tune covers 115 Challenger MT Series configurations, including the 675, 675E 8.4l Tier4, 535E 6.6l Tier4, 955B 15.1l Tier2. Stock power spans 67 to 600 HP. Stage 1 adds up to +105 HP (+36%).
An ECU tune re-optimises the factory calibration within the standard hardware limits. On a working machine the useful change is broad, early torque for heavy draft, PTO work and hydraulics — where the load actually is.
Fuelling, boost and timing are calibrated together, with exhaust temperature and smoke kept in check. The machine is scanned before and after the write, and its original file is retained.
Power tune — more torque and pulling power at working revs for draft, PTO and hydraulic loads, calibrated within the standard hardware limits.
DPF off, EGR off and AdBlue / SCR off — cleaner running and fewer regeneration interruptions and DEF faults that cost downtime in the field.
| Engine | Stock | Tuned | Stage 1 gain |
|---|---|---|---|
| 865C 18.1l Tier3 | 525 hp | 630 hp | +105 hp |
| 855E 16.8l Tier4 | 496 hp | 600 hp | +104 hp |
| 865E 16.8l Tier4 | 548 hp | 650 hp | +102 hp |
| 835B 15.2l Tier2 | 350 hp | 450 hp | +100 hp |
| 865B 18.1l Tier3 | 510 hp | 610 hp | +100 hp |
Typical gains for these engines from our tuning catalogue; exact results depend on the specific engine and its condition. Choose your generation and engine above for its stock and tuned figures.
Useful tuning is not about one peak number. It is about a machine that pulls harder at working revs and holds it through long days in the field, with less strain on the driveline.
The calibration targets the usable torque band while respecting the transmission, cooling and exhaust-temperature limits of the selected engine.
Depending on the exact engine, Stage 1 on the MT Series adds up to +105 HP (+36%). Choose your generation and engine above for its precise stock and tuned figures from our database.
We health check the vehicle first and keep a full stock backup. The calibration is built around the limits of the engine, turbo, transmission, cooling system and the condition of the vehicle.
Yes — more torque low down means the machine pulls heavier draft and runs implements and hydraulics more comfortably, often with lower fuel burn per hour and fewer regeneration interruptions in the field. Every calibration respects the engine, driveline and cooling limits.
The right route depends on the vehicle, its modifications and how it is used. A towing or work vehicle may benefit from workshop checks, while a healthy standard configuration can often be handled remotely.
The Challenger MT branch is broad. It starts with the smaller MT425 and MT445 and runs through mid-size models to the MT800 and MT900 machines. Engines in the listings range from 4.4-litre up to 18.1-litre.
Letter suffixes (B, C, D and E) mark separate entries, each with its own emission tier from Tier 2 to Tier 4. Always give the complete model with its suffix.
No. The suffix separates entries with different engine and tier details, so treat each as its own tractor.
The full model with suffix, the engine plate and the original controller read, so the matching listing can be confirmed.
Sign in with your files.alttune.com account to unlock the advanced cable listing.