Most popular brands
Dyno chart
* This chart should be considered a visual representation only, actual values will vary.
John Deere 9R Series tractor ECU tuning and remapping for 31 supported diesel engine variants. Compare Stage 1, Stage 2 and Stage 3 power and torque gains, ECU compatibility and available tuning options.
Search 43,000+ vehicle / ECU combinations
* This chart should be considered a visual representation only, actual values will vary.
31 tuning configurations for the John Deere 9R Series. Select your exact engine to see gains, options and connection details. Power gains up to +62 HP.
Alt Tune covers 31 John Deere 9R Series configurations, including the 9460r SS 13.5l 6CIL (6135HFC95PSX) Tier 3, 9560r 13.5l 6CIL (6135HFC95PSX) Tier 3, 9560r SS 13.5l 6CIL (6135HFC95PSX) Tier 3, 9350r 13.5l. Stock power spans 360 to 620 HP. Stage 1 adds up to +62 HP (+10%).
An ECU tune re-optimises the factory calibration within the standard hardware limits. On a working machine the useful change is broad, early torque for heavy draft, PTO work and hydraulics — where the load actually is.
Fuelling, boost and timing are calibrated together, with exhaust temperature and smoke kept in check. The machine is scanned before and after the write, and its original file is retained.
Power tune — more torque and pulling power at working revs for draft, PTO and hydraulic loads, calibrated within the standard hardware limits.
DPF off, EGR off and AdBlue / SCR off — cleaner running and fewer regeneration interruptions and DEF faults that cost downtime in the field.
| Engine | Stock | Tuned | Stage 1 gain |
|---|---|---|---|
| 9620r RT RX 15.0l Tier4b | 620 hp / 2800 Nm | 682 hp / 3150 Nm | +62 hp / +350 Nm |
| 9620r 15.0l | 620 hp / 2800 Nm | 682 hp | +62 hp |
| 9620r QSX 15.0l | 620 hp / 2800 Nm | 682 hp | +62 hp |
| 9570r 15.0l | 570 hp / 2631 Nm | 627 hp | +57 hp |
| 9570r QSX 15.0l | 570 hp / 2631 Nm | 627 hp | +57 hp |
Typical gains for these engines from our tuning catalogue; exact results depend on the specific engine and its condition. Choose your generation and engine above for its stock and tuned figures.
Useful tuning is not about one peak number. It is about a machine that pulls harder at working revs and holds it through long days in the field, with less strain on the driveline.
The calibration targets the usable torque band while respecting the transmission, cooling and exhaust-temperature limits of the selected engine.
Depending on the exact engine, Stage 1 on the 9R Series adds up to +62 HP (+10%). Choose your generation and engine above for its precise stock and tuned figures from our database.
We health check the vehicle first and keep a full stock backup. The calibration is built around the limits of the engine, turbo, transmission, cooling system and the condition of the vehicle.
Yes — more torque low down means the machine pulls heavier draft and runs implements and hydraulics more comfortably, often with lower fuel burn per hour and fewer regeneration interruptions in the field. Every calibration respects the engine, driveline and cooling limits.
The right route depends on the vehicle, its modifications and how it is used. A towing or work vehicle may benefit from workshop checks, while a healthy standard configuration can often be handled remotely.
The 9R entries here split into 13.5-litre and 15.0-litre engines. Models from the 9350R up to the 9560R sit in the 13.5-litre group, while the 9570R, 9620R and QSX-labelled entries are 15.0-litre.
Wheeled R, track RT and SS variants are listed separately, and some models appear under both older and newer tier labels. Match the suffix, engine size and the controller read from your own tractor.
No. They are different tractor families with different engine sizes, so each needs its own matched listing.
The full model with its R or RT suffix, serial or build details, and the original read. That lets the matching entry be confirmed for your machine specifically.
Sign in with your files.alttune.com account to unlock the advanced cable listing.