John Deere code ECU 28.14 — Throttle input 3 voltage outside valid range
SPN 28 · FMI 14 · Controller ECU
What ECU 28.14 means for you
Diagnose soon: the affected function may not work correctly while the code is active.
Symptoms
- Code ECU 28.14 (also written ECU 000028.14) stored by the Engine Control Unit
- A warning may be shown on the machine display
Common causes
- The condition reported for the throttle input 3 is present
- A related code that points to the underlying cause
- Machine operating conditions or settings that trigger this condition
Tune it yourself
Add John Deere machine tuning to your workshop. We supply the tools and the file, and you keep the profit.
Start tuningWhat this code means
The engine control unit (ECU) reads a voltage on throttle input 3 that lies outside the range it accepts as valid.
In SAE J1939 terms this is SPN 28, reported with failure mode identifier (FMI) 14: the manufacturer's special instructions apply. It is logged by the Engine Control Unit (ECU).
How a workshop diagnoses it
- Read all active and stored codes with a John Deere-compatible diagnostic tool and note related codes.
- Check the throttle input 3 and the operating conditions around it.
- Follow the John Deere service procedure for this code, then clear it and retest.
Frequently asked questions
The engine control unit (ECU) reads a voltage on throttle input 3 that lies outside the range it accepts as valid.
Severity: medium. Diagnose soon: the affected function may not work correctly while the code is active.
Our code list records it on John Deere tractors. The exact meaning can depend on the machine and software level, so confirm with a diagnostic read.
No. A calibration does not repair the fault behind this code. Repair the throttle input 3 issue and confirm no codes remain active before the ECU is read for tuning.
Tune your John Deere
Find your John Deere in our tuning catalogue: stage 1 figures, the tool and cable for each machine, and an ECU file service for workshops.
John Deere tuning