Black Friday Sale Save up to 41% on KESS3 activations and bundles Ends 12 Jan 2027 Shop the deals
Skip to main content

John Deere code ECU 29.00 — Foot throttle reading very high

SPN 29 · FMI 0 · Controller ECU

ECU 29.00 Severity Serious

What ECU 29.00 means for you

Most severe fault level: diagnose before continuing to work the machine.

Symptoms

  • Code ECU 29.00 (also written ECU 000029.00) stored by the Engine Control Unit
  • A warning may be shown on the machine display

Common causes

  • A real operating condition: the foot throttle pedal (B19) reading is genuinely too high
  • Faulty foot throttle pedal (B19) giving an incorrect reading
  • Wiring or connector fault affecting the foot throttle pedal (B19) signal

Tune it yourself

Add John Deere machine tuning to your workshop. We supply the tools and the file, and you keep the profit.

Start tuning

What this code means

The foot throttle pedal B19 reports a value well beyond its expected working range, although the ECU still regards the signal data as valid (FMI 0).

In SAE J1939 terms this is SPN 29, reported with failure mode identifier (FMI) 0: the value is valid but above its normal operating range (most severe level). It is logged by the Engine Control Unit (ECU).

How a workshop diagnoses it

  1. Read all active and stored codes with a John Deere-compatible diagnostic tool and note related codes.
  2. Compare the foot throttle pedal (B19) reading in live data with the actual machine condition before replacing parts.
  3. Look for the operating cause (load, cooling, filters, supply) if the reading is genuine.
  4. If the real value is normal, test the foot throttle pedal (B19) and its wiring.

Frequently asked questions

01 What does John Deere code ECU 29.00 (000029.00) mean?

The foot throttle pedal B19 reports a value well beyond its expected working range, although the ECU still regards the signal data as valid (FMI 0).

02 Is John Deere code ECU 29.00 serious?

Severity: high. Most severe fault level: diagnose before continuing to work the machine.

03 Which John Deere machines can show ECU 29.00?

Our code list records it on John Deere skid steers. The exact meaning can depend on the machine and software level, so confirm with a diagnostic read.

04 Will an ECU remap clear code ECU 29.00?

No. A calibration does not repair the fault behind this code. Repair the foot throttle pedal (B19) issue and confirm no codes remain active before the ECU is read for tuning.

Tune your John Deere

Find your John Deere in our tuning catalogue: stage 1 figures, the tool and cable for each machine, and an ECU file service for workshops.

John Deere tuning
John Deere tractor working in a field
Photo: Ronnie Robertson / CC BY-SA 2.0

← All John Deere fault codes