Black Friday Sale Save up to 41% on KESS3 activations and bundles Ends 12 Jan 2027 Shop the deals
Skip to main content

John Deere code ECU 29.02 — Foot throttle signal erratic or invalid

SPN 29 · FMI 2 · Controller ECU

ECU 29.02 Severity Moderate

What ECU 29.02 means for you

Diagnose soon: the affected function may not work correctly while the code is active.

Symptoms

  • Code ECU 29.02 (also written ECU 000029.02) stored by the Engine Control Unit
  • A warning may be shown on the machine display

Common causes

  • Loose, corroded or intermittent connection on the foot throttle pedal (B19) circuit
  • Chafed wiring or electrical interference on the signal
  • Failing foot throttle pedal (B19)

Tune it yourself

Add John Deere machine tuning to your workshop. We supply the tools and the file, and you keep the profit.

Start tuning

What this code means

The ECU flags the secondary throttle signal from the foot throttle pedal B19 as abnormal: the data is unstable, drops in and out, or does not make sense (FMI 2).

In SAE J1939 terms this is SPN 29, reported with failure mode identifier (FMI) 2: the data is erratic, intermittent or incorrect. It is logged by the Engine Control Unit (ECU).

How a workshop diagnoses it

  1. Read all active and stored codes with a John Deere-compatible diagnostic tool and note related codes.
  2. Watch the foot throttle pedal (B19) value in live data while flexing the harness to find an intermittent connection.
  3. Inspect connectors, pins and grounds for corrosion or looseness.
  4. Compare the reading with the actual condition; replace the foot throttle pedal (B19) if the signal stays erratic.

Frequently asked questions

01 What does John Deere code ECU 29.02 (000029.02) mean?

The ECU flags the secondary throttle signal from the foot throttle pedal B19 as abnormal: the data is unstable, drops in and out, or does not make sense (FMI 2).

02 Is John Deere code ECU 29.02 serious?

Severity: medium. Diagnose soon: the affected function may not work correctly while the code is active.

03 Which John Deere machines can show ECU 29.02?

Our code list records it on John Deere skid steers. The exact meaning can depend on the machine and software level, so confirm with a diagnostic read.

04 Will an ECU remap clear code ECU 29.02?

No. A calibration does not repair the fault behind this code. Repair the foot throttle pedal (B19) issue and confirm no codes remain active before the ECU is read for tuning.

Tune your John Deere

Find your John Deere in our tuning catalogue: stage 1 figures, the tool and cable for each machine, and an ECU file service for workshops.

John Deere tuning
John Deere tractor working in a field
Photo: Ronnie Robertson / CC BY-SA 2.0

← All John Deere fault codes