John Deere code ECU 103.02 — Turbocharger speed signal not valid
SPN 103 · FMI 2 · Controller ECU
What ECU 103.02 means for you
Diagnose soon: the affected function may not work correctly while the code is active.
Symptoms
- Code ECU 103.02 (also written ECU 000103.02) stored by the Engine Control Unit
- A warning may be shown on the machine display
Common causes
- Loose, corroded or intermittent connection on the turbocharger speed signal circuit
- Chafed wiring or electrical interference on the signal
- Failing turbocharger speed signal
Tune it yourself
Add John Deere machine tuning to your workshop. We supply the tools and the file, and you keep the profit.
Start tuningWhat this code means
The ECU cannot trust the turbocharger speed reading and flags it as invalid (FMI 2, erratic or incorrect data).
On John Deere skid steers: On skid steers no further cause is given beyond the invalid speed value.
On John Deere tractors: On tractors the ECU attributes it to too much electrical noise in the turbo speed sensor signal, and it is also logged as a turbo speed mismatch.
In SAE J1939 terms this is SPN 103, reported with failure mode identifier (FMI) 2: the data is erratic, intermittent or incorrect. It is logged by the Engine Control Unit (ECU).
How a workshop diagnoses it
- Read all active and stored codes with a John Deere-compatible diagnostic tool and note related codes.
- Watch the turbocharger speed signal value in live data while flexing the harness to find an intermittent connection.
- Inspect connectors, pins and grounds for corrosion or looseness.
- Compare the reading with the actual condition; replace the turbocharger speed signal if the signal stays erratic.
Frequently asked questions
The ECU cannot trust the turbocharger speed reading and flags it as invalid (FMI 2, erratic or incorrect data).
Severity: medium. Diagnose soon: the affected function may not work correctly while the code is active.
Our code list records it on John Deere skid steers and John Deere tractors. The exact meaning can depend on the machine and software level, so confirm with a diagnostic read.
No. A calibration does not repair the fault behind this code. Repair the turbocharger speed signal issue and confirm no codes remain active before the ECU is read for tuning.
Tune your John Deere
Find your John Deere in our tuning catalogue: stage 1 figures, the tool and cable for each machine, and an ECU file service for workshops.
John Deere tuning