John Deere code ECU 103.31 — No signal from turbocharger speed sensor
SPN 103 · FMI 31 · Controller ECU
What ECU 103.31 means for you
Diagnose soon: the affected function may not work correctly while the code is active.
Symptoms
- Code ECU 103.31 (also written ECU 000103.31) stored by the Engine Control Unit
- A warning may be shown on the machine display
Common causes
- The condition reported for the turbocharger speed sensor is present
- A related code that points to the underlying cause
- Machine operating conditions or settings that trigger this condition
Tune it yourself
Add John Deere machine tuning to your workshop. We supply the tools and the file, and you keep the profit.
Start tuningWhat this code means
The ECU receives nothing from the turbo speed sensor; the speed signal is missing altogether (FMI 31, condition exists).
On John Deere skid steers: On skid steers no signal at all arrives from the turbocharger's speed sensor.
On John Deere tractors: On tractors the ECU sees no input at all from the turbo speed sensor channel.
In SAE J1939 terms this is SPN 103, reported with failure mode identifier (FMI) 31: a monitored condition exists. It is logged by the Engine Control Unit (ECU).
How a workshop diagnoses it
- Read all active and stored codes with a John Deere-compatible diagnostic tool and note related codes.
- Check the turbocharger speed sensor and the operating conditions around it.
- Follow the John Deere service procedure for this code, then clear it and retest.
Frequently asked questions
The ECU receives nothing from the turbo speed sensor; the speed signal is missing altogether (FMI 31, condition exists).
Severity: medium. Diagnose soon: the affected function may not work correctly while the code is active.
Our code list records it on John Deere skid steers and John Deere tractors. The exact meaning can depend on the machine and software level, so confirm with a diagnostic read.
No. A calibration does not repair the fault behind this code. Repair the turbocharger speed sensor issue and confirm no codes remain active before the ECU is read for tuning.
Tune your John Deere
Find your John Deere in our tuning catalogue: stage 1 figures, the tool and cable for each machine, and an ECU file service for workshops.
John Deere tuning