Black Friday Sale Save up to 41% on KESS3 activations and bundles Ends 12 Jan 2027 Shop the deals
Skip to main content

John Deere code ECU 100.18 — Engine oil pressure low (moderate level)

SPN 100 · FMI 18 · Controller ECU

ECU 100.18 Severity Moderate

What ECU 100.18 means for you

Diagnose soon: the affected function may not work correctly while the code is active.

Symptoms

  • Code ECU 100.18 (also written ECU 000100.18) stored by the Engine Control Unit
  • A warning may be shown on the machine display

Common causes

  • A real operating condition: the engine oil pressure reading is genuinely too low
  • Faulty engine oil pressure giving an incorrect reading
  • Wiring or connector fault affecting the engine oil pressure signal

Tune it yourself

Add John Deere machine tuning to your workshop. We supply the tools and the file, and you keep the profit.

Start tuning

What this code means

Engine oil pressure measured by the ECU is somewhat under the expected value, at the moderate severity level (FMI 18).

In SAE J1939 terms this is SPN 100, reported with failure mode identifier (FMI) 18: the value is below its normal range (moderately severe level). It is logged by the Engine Control Unit (ECU).

How a workshop diagnoses it

  1. Read all active and stored codes with a John Deere-compatible diagnostic tool and note related codes.
  2. Confirm the real engine oil pressure with a mechanical pressure gauge before replacing parts.
  3. Look for the operating cause (load, cooling, filters, supply) if the reading is genuine.
  4. If the real value is normal, test the engine oil pressure and its wiring.

Frequently asked questions

01 What does John Deere code ECU 100.18 (000100.18) mean?

Engine oil pressure measured by the ECU is somewhat under the expected value, at the moderate severity level (FMI 18).

02 Is John Deere code ECU 100.18 serious?

Severity: medium. Diagnose soon: the affected function may not work correctly while the code is active.

03 Which John Deere machines can show ECU 100.18?

Our code list records it on John Deere skid steers and John Deere tractors. The exact meaning can depend on the machine and software level, so confirm with a diagnostic read.

04 Will an ECU remap clear code ECU 100.18?

No. A calibration does not repair the fault behind this code. Repair the engine oil pressure issue and confirm no codes remain active before the ECU is read for tuning.

Tune your John Deere

Find your John Deere in our tuning catalogue: stage 1 figures, the tool and cable for each machine, and an ECU file service for workshops.

John Deere tuning
John Deere tractor working in a field
Photo: Ronnie Robertson / CC BY-SA 2.0

← All John Deere fault codes