Black Friday Sale Save up to 41% on KESS3 activations and bundles Ends 12 Jan 2027 Shop the deals
Skip to main content

John Deere code ECU 100.31 — Oil pressure reading present with engine stopped

SPN 100 · FMI 31 · Controller ECU

ECU 100.31 Severity Moderate

What ECU 100.31 means for you

Diagnose soon: the affected function may not work correctly while the code is active.

Symptoms

  • Code ECU 100.31 (also written ECU 000100.31) stored by the Engine Control Unit
  • A warning may be shown on the machine display

Common causes

  • The condition reported for the engine oil pressure signal is present
  • A related code that points to the underlying cause
  • Machine operating conditions or settings that trigger this condition

Tune it yourself

Add John Deere machine tuning to your workshop. We supply the tools and the file, and you keep the profit.

Start tuning

What this code means

The ECU sees an oil pressure value while engine speed is 0 rpm, which is not plausible, so the oil pressure signal is considered invalid (FMI 31).

On John Deere skid steers: On skid steers it is logged as an invalid engine oil pressure reading.

In SAE J1939 terms this is SPN 100, reported with failure mode identifier (FMI) 31: a monitored condition exists. It is logged by the Engine Control Unit (ECU).

How a workshop diagnoses it

  1. Read all active and stored codes with a John Deere-compatible diagnostic tool and note related codes.
  2. Check the engine oil pressure signal and the operating conditions around it.
  3. Follow the John Deere service procedure for this code, then clear it and retest.

Frequently asked questions

01 What does John Deere code ECU 100.31 (000100.31) mean?

The ECU sees an oil pressure value while engine speed is 0 rpm, which is not plausible, so the oil pressure signal is considered invalid (FMI 31).

02 Is John Deere code ECU 100.31 serious?

Severity: medium. Diagnose soon: the affected function may not work correctly while the code is active.

03 Which John Deere machines can show ECU 100.31?

Our code list records it on John Deere skid steers and John Deere tractors. The exact meaning can depend on the machine and software level, so confirm with a diagnostic read.

04 Will an ECU remap clear code ECU 100.31?

No. A calibration does not repair the fault behind this code. Repair the engine oil pressure signal issue and confirm no codes remain active before the ECU is read for tuning.

Tune your John Deere

Find your John Deere in our tuning catalogue: stage 1 figures, the tool and cable for each machine, and an ECU file service for workshops.

John Deere tuning
John Deere tractor working in a field
Photo: Ronnie Robertson / CC BY-SA 2.0

← All John Deere fault codes