John Deere code ECU 91.01 — Hand throttle reading very low
SPN 91 · FMI 1 · Controller ECU
What ECU 91.01 means for you
Most severe fault level: diagnose before continuing to work the machine.
Symptoms
- Code ECU 91.01 (also written ECU 000091.01) stored by the Engine Control Unit
- A warning may be shown on the machine display
Common causes
- A real operating condition: the hand throttle dial (B18) reading is genuinely too low
- Faulty hand throttle dial (B18) giving an incorrect reading
- Wiring or connector fault affecting the hand throttle dial (B18) signal
Tune it yourself
Add John Deere machine tuning to your workshop. We supply the tools and the file, and you keep the profit.
Start tuningWhat this code means
The hand throttle dial B18 reports a value well under its expected working range, although the ECU still regards the signal data as valid (FMI 1).
In SAE J1939 terms this is SPN 91, reported with failure mode identifier (FMI) 1: the value is valid but below its normal operating range (most severe level). It is logged by the Engine Control Unit (ECU).
How a workshop diagnoses it
- Read all active and stored codes with a John Deere-compatible diagnostic tool and note related codes.
- Compare the hand throttle dial (B18) reading in live data with the actual machine condition before replacing parts.
- Look for the operating cause (load, cooling, filters, supply) if the reading is genuine.
- If the real value is normal, test the hand throttle dial (B18) and its wiring.
Frequently asked questions
The hand throttle dial B18 reports a value well under its expected working range, although the ECU still regards the signal data as valid (FMI 1).
Severity: high. Most severe fault level: diagnose before continuing to work the machine.
Our code list records it on John Deere skid steers. The exact meaning can depend on the machine and software level, so confirm with a diagnostic read.
No. A calibration does not repair the fault behind this code. Repair the hand throttle dial (B18) issue and confirm no codes remain active before the ECU is read for tuning.
Tune your John Deere
Find your John Deere in our tuning catalogue: stage 1 figures, the tool and cable for each machine, and an ECU file service for workshops.
John Deere tuning