Black Friday Sale Save up to 41% on KESS3 activations and bundles Ends 12 Jan 2027 Shop the deals
Skip to main content

John Deere code ECU 91.02 — Hand throttle signal erratic or invalid

SPN 91 · FMI 2 · Controller ECU

ECU 91.02 Severity Moderate

What ECU 91.02 means for you

Diagnose soon: the affected function may not work correctly while the code is active.

Symptoms

  • Code ECU 91.02 (also written ECU 000091.02) stored by the Engine Control Unit
  • A warning may be shown on the machine display

Common causes

  • Loose, corroded or intermittent connection on the hand throttle dial (B18) circuit
  • Chafed wiring or electrical interference on the signal
  • Failing hand throttle dial (B18)

Tune it yourself

Add John Deere machine tuning to your workshop. We supply the tools and the file, and you keep the profit.

Start tuning

What this code means

The ECU considers the signal from the hand throttle dial B18 unreliable: the data is unstable, drops in and out, or does not make sense (FMI 2).

In SAE J1939 terms this is SPN 91, reported with failure mode identifier (FMI) 2: the data is erratic, intermittent or incorrect. It is logged by the Engine Control Unit (ECU).

How a workshop diagnoses it

  1. Read all active and stored codes with a John Deere-compatible diagnostic tool and note related codes.
  2. Watch the hand throttle dial (B18) value in live data while flexing the harness to find an intermittent connection.
  3. Inspect connectors, pins and grounds for corrosion or looseness.
  4. Compare the reading with the actual condition; replace the hand throttle dial (B18) if the signal stays erratic.

Frequently asked questions

01 What does John Deere code ECU 91.02 (000091.02) mean?

The ECU considers the signal from the hand throttle dial B18 unreliable: the data is unstable, drops in and out, or does not make sense (FMI 2).

02 Is John Deere code ECU 91.02 serious?

Severity: medium. Diagnose soon: the affected function may not work correctly while the code is active.

03 Which John Deere machines can show ECU 91.02?

Our code list records it on John Deere skid steers. The exact meaning can depend on the machine and software level, so confirm with a diagnostic read.

04 Will an ECU remap clear code ECU 91.02?

No. A calibration does not repair the fault behind this code. Repair the hand throttle dial (B18) issue and confirm no codes remain active before the ECU is read for tuning.

Tune your John Deere

Find your John Deere in our tuning catalogue: stage 1 figures, the tool and cable for each machine, and an ECU file service for workshops.

John Deere tuning
John Deere tractor working in a field
Photo: Ronnie Robertson / CC BY-SA 2.0

← All John Deere fault codes